Structure evidence
Open Ladder Structure
The open ladder structure helps buyers judge rod spacing, open area, and cleaning access before review.
Z-Type Ladder Belt is reviewed for high open-area conveyor routes where drainage, airflow, cleaning access, and lightweight transfer are important.
Used for washing, cooling, draining, frying, transfer, and process lines where a simpler open structure is preferred.
Final product selection is confirmed from the drawing, sample, old-belt evidence, and installed-line conditions available for the project.
Missing some data? Send the drawing, photos, and dimensions you have; JBL Mesh Belt will identify the remaining Z-Type Ladder Belt review points.
Start Product InquiryReference options from the Z-Type Ladder Belt technical specification (2026-10-02). Use them to see what is possible before you send your drawing or old belt data.
| Parameter | Reference options |
|---|---|
| Material | SUS304 / SUS316 |
| Pitch | 4–23.8 mm (0.157–0.937 in); custom pitches |
| Wire diameter | 1 / 1.2 / 1.3 / 1.4 / 1.5 / 1.6 / 1.8 / 1.9 / 2 / 2.3 / 2.35 / 2.5 / 2.8 mm (0.039 / 0.047 / 0.051 / 0.055 / 0.059 / 0.063 / 0.071 / 0.075 / 0.079 / 0.091 / 0.093 / 0.098 / 0.110 in) |
| Number of spaces* | At least 3; odd number |
| Loop width / edge size* | Reference: wire diameter × 5 |
| Belt width | 76–2352 mm (2.99–92.6 in); custom widths |
| Belt length | Custom (m or ft) |
| Edge treatment | SLE (single-loop edge) / DLE (double-loop edge) |
| Sprockets | Supply optional; matched to the project drawing |
Reference ranges are configuration-specific. Final dimensions follow the confirmed project drawing. Inch values are rounded conversions from the metric dimensions. *Confirmed for each belt structure on the project drawing.
These original images show product, inspection, application, or packing references while keeping customer names, shipping labels, and private project information out of public view.
The open ladder structure helps buyers judge rod spacing, open area, and cleaning access before review.
Flat wire and open ladder routes can be compared when open area and product support need balancing.
Measured photos help connect the product body, edge route, and final specification before release.
Review these common failure points as practical checkpoints before quotation, drawing approval, or production release.
Complete drawings are helpful, but preliminary review can start from photos, samples, measurements, and operating conditions.
Start with the information you already have. Our team will clarify missing details before confirming a quotation.
Share the belt width, pitch, wire or rod diameter, and available drawing or sample measurements.
Describe the conveyed product, load, temperature, belt speed, and cleaning conditions.
Include the equipment type, drive details, and existing belt or sprocket photos when available.
Tell us the quantity, destination, target delivery date, and required inspection documents.
Ask which records are available for the specific OEM, distributor, or replacement project under review.
Old belt, product, edge, drive, or application photos.
Width, pitch, wire, rod, edge, or part dimensions.
Material, weld, burr, running, or release checks.
Belt, parts, label, crate, and accessory evidence.
Send the product size and load, transfer points, and required airflow, drainage or washing conditions. JBL Mesh Belt reviews whether the open rod structure provides enough support; final selection follows the project review and confirmed drawing.
Share any known belt width, rod pitch and diameter, edge structure, material, product size and operating conditions. JBL Mesh Belt checks support, open area and clearances together, and final dimensions follow the confirmed drawing or old-belt sample review.
Provide drive, shaft, sprocket or edge-route photos with pitch, tooth and guide details when available. JBL Mesh Belt reviews rod pitch, edge engagement and tracking before the project configuration is confirmed.
Send full-belt, edge, joining and damaged-area photos, measured width and rod data, and a sample when available. JBL Mesh Belt compares the old belt and conveyor interface, then records the agreed replacement route in the confirmed project drawing.
Share the running direction, guide and support path, transfer gaps, joining method, washing, drainage and residue conditions. JBL Mesh Belt reviews edge clearance, product transfer and cleaning access; final details follow the confirmed project configuration.
Send the application, product and operating conditions, available rod, width, edge and drive dimensions, quantity, delivery target and required records. JBL Mesh Belt identifies missing points and quotes against the confirmed project scope.
All listed dimensions and configuration options can be customized for the project, subject to engineering review and the confirmed drawing.
Z-Type Ladder Belt review should connect product structure, available evidence, inspection records, packing route, and repeat-order information before production release.
You do not need a complete specification to start. Send the available drawing, old belt photo, sprocket photo, system photo, or running video first. The JBL Mesh Belt team will reply with the missing review points.
These SOP points are converted from JBL Mesh Belt order-control, QC, packing, and delivery documents into buyer-facing checkpoints.
Old belt photos, samples, drawings, conveyor photos, product load, temperature, cleaning condition, and running videos can start the review.
Width, pitch, wire, rod, edge type, mesh opening, drive route, material, and accessory requirements are reviewed before production.
Weld quality, burr risk, sharp points, surface condition, edge alignment, sprocket fit, and packing protection become release checks.
Confirmed specs, photos, packing records, accessory lists, and shipment documents can be archived for future replacement or repeat orders.
Send the available drawing, sample, operating details, and inspection requirements for a project-specific review.
Before a Z-type ladder belt is packed, the edge type and dimensions are checked against what you approved.
Pressed edge or plain edge is checked against the photo or sample you approved. The two look and fit differently.
Pitch, wire diameter, edge loop width and overall width are measured against the drawing.
The belt is clean and dry, and all tags are removed before packing.
Spare sleeves are counted against the order and photographed.
JBL Mesh Belt can identify which specification details are missing before quotation or production confirmation.
Read the documents for this belt
Z-Type Ladder Belt: specification and production & quality control process, page by page
Opens in a new tab · no download · no sign-up
Document Library
Compare pitch, wire, edge, surface and sprocket options with your equipment before you send a drawing or old-belt photos. 13 technical specifications and 11 production and quality control documents for JBL metal conveyor belts and sprockets, page by page on your phone or computer.
Engineering review
Not sure which specification fits your line?
Send your drawing or old-belt photos on WhatsApp. We compare them with the specification and tell you what still needs to be measured.
