Freezing, baking, cooling, washing or heavy conveying: each process asks something different of a belt. Choose the application closest to your line to see what we check, then send a photo or drawing for review.
Each page lists the operating details that matter for that process and the belt types usually reviewed for it.
Wet, cold product on a continuous belt. We check open area, product support and how the belt is cleaned.
View what we check
Heavier product and frequent washdown. We check load, belt surface and the cleaning method.
View what we check
Baked product moving through freezing or cooling. We check belt opening, product support and transfer points.
View what we check
New spiral or tunnel equipment. We check drum or cage geometry, turn ratio and drive arrangement against your drawing.
View what we check
Stacking belts carry the tiers above them. We check side plates, stacking height and the existing belt before replacement.
View what we check
No drawing, or the original supplier is gone. We work from photos, measurements and a sample section.
View what we check
Steam, wet product, washing chemicals or hot oil. We check material, chain and edge against the process before a belt type is suggested.
View what we check
Tell us what equipment you run and what the belt needs to do. We will point you to the right belt type or review your details directly.
Document Library
Compare pitch, wire, edge, surface and sprocket options with your equipment before you send a drawing or old-belt photos. 13 technical specifications and 11 production and quality control documents for JBL metal conveyor belts and sprockets, page by page on your phone or computer.
Engineering review
Not sure which specification fits your line?
Send your drawing or old-belt photos on WhatsApp. We compare them with the specification and tell you what still needs to be measured.
